Mixer-Shotcrete Units

Mixing-Shotcreting Unit type ZMT-H-01-90/30 with hydraulic drive

Application:

Used for continuous mixing of dry mineral mixtures (of special destination) with water, pumping and transportation by hose to certain distances and putting on the wet mixture by special nozzle onto the prepared surfaces.

The device can be used only for dry mixtures of special purposes, if the producer’s data sheet explicitly indicates the mixture can be applied into the process of wet method of torkreting  or spraying.

Technical data:

Name Mixing-Shotcreting Unit
Type ZMT-H-01-90/30
Max. working pressure  up to 30 bar (3,0 MPa)
Max. output up to 90 dm3/min.
Horizontal pumping up to 40 ÷ 60 m
Grain particles max 4 ÷ 6 mm
Suggested pump rotational speed 180 ÷ 300 rpm
Drive: hydraulic,  absorbency 160 cm3/rev.
Supply hydraulic oil HLP 46 or HLP 68
Hydraulic oil required filtration 16 µm
Required oil pressure 140 ÷ 160 bar (14-16MPa)
Horizontal deviation  longitudinal and transversal +/- 5°
Cooling air-cooling by convection
Absorbency 50 – 90 dm3/min.
Water mains supply socket stecko 25 or other according to the order
Max water pressure 25 bar (2,5 MPa)
Oil supply M26x1,5 DKOL acc to DIN, with  adapters or other according to the order
Pressure connection (outlet) female socket cam-lock mortar  DN50 or DN40
Mixing basket capacity cca 75dm3
Weight: cca 500kg
Dimensions (length x width x height) 1900 x 800 x 1000 mm

It is possible to manufacture the device with explosion-proof mark  Ex I M2 c X   or without it.

 

Download

Gallery

Mixing-Shotcreting Unit type ZMT-H-01-90/30 with hydraulic drive Mixing-Shotcreting Unit type ZMT-H-01-90/30 with hydraulic drive