Water Pumping System type ZPW P3-08 A1 D**/ZPW P3-10 with.electr. drv.& gear

Application:

supplying the drilling installation with pressure water to wash the drilled hole from the rock residues and to cool the operational tool (driller),
supplying hydro fracturing units with the pure, pressure water,
supplying the water system and for spraying the coal machines,
local supply of the water for power and emulsion hydraulic systems and small-scale mechanical equipment,
supplying the pure pressure water to make the hydrostatic tests, e.g. during the drilling after the casing pipe (tightness tests)

Specification:

compliance with the 2006/42/WE Directive (Machine Directive -MD) and with ATEX 114 Directive (2014/34/UE),
product is adopted to the operation in the black coal mines where the danger of the methane and coal dust explosion exist ("a", "b" or "c" degree of the methane explosion danger and "A" or "B" class of the coal dust explosion).
product is marked with CE mark and explosion proof casing according to ATEX: Ex I M2 c

Technical data:

Name	Water Pumping System with electric drive and gear box
Type	ZPW P3-08 A1 D/ZPW P3-10 A1 D
Max. operational pressure	up to 200/250 bar (20,0/25,0 MPa)¹
Max. capacity	up to 163 dm³/min²
Engine nominal rotational speed	750, 1000 rpm
Engine power	up to 30 kW
Drive	electric engine
Horizontal deflection longitudinal and transversal	+/-10^o
Cooling	convectional, using the air from the excavation
Explosion-proof mark	Ex I M2 c
Examples of the pump operational parameters provided for the above mentioned application:	P_work=200 bar, Q_work=40 dm³/min P_work=100 bar, Q_work=125 dm³/min
Weight	about 960 kg (without the oil in the pump)
Dimensions (length x width x depth)	2190 x 765 x 840 mm

¹depending on the plunge diameter and the power on the synchronic engine shaft

^₂depending on the plunge diameter and the synchronic engine rotational speed